| Quantity | Unit Price | Discount |
|---|---|---|
| 2 - 6 | 19.53€ | 5% |
| 7 - 10 | 18.50€ | 10% |
| 11 - 20 | 17.47€ | 15% |
| 21+ | 17.06€ | 17% |
* Price may vary depending on order volume. For bulk orders, please request an individual quotation.
It cleans, degreases parts and speeds up anaerobic adhesives and sealants fixture time. Curing effect is obtained in 20 - 120 seconds depending on type of adhesive, gap between parts and room temperature; wait for solvent evaporation before assembling parts. It can be used either on flange or threaded joints; its use might reduce final mechanical strength.
The Activator is applied on one surface and let to dry for a few seconds.
| Composition | Organic chemicals in solvent |
| Appearance | Green |
| Viscosity (+25°C – mPa·s) | 1 – 2 |
| Specific weight at +25°C (g/ml) | 0.8 |
| Flash point (COC/DIN/ISO 2592) | +21°C |
| Activation effect on surface | 24 hours** |
| Shelf life | 1 year at +25°C in original unopened packaging |
Note: Parts keep their activation for up to 3 months if stored protected from dust and atmospheric agents.
Breakaway locking torque (ISO 10964) after 5 min.: >5 Nm
(Ref. AE 83-54)
