Removing cyanoacrylate glue from the surface

Removing cyanoacrylate glue from the surface

Customer's question: How to most effectively remove cyanoacrylate glue from the glass surface?

Our answer: We recommend using our product CR 1 Remover, which is a special product designed to remove cyanoacrylate glue (usually known as superglue) from various surfaces. CR 1 Remover is a mixture of solvents used to remove hardened cyanoacrylate glue not only from glass, but also from various surfaces, clothing, or to degrease parts assembled with cyanoacrylate adhesives.

How to properly use CR1 Remover to remove cyanoacrylate glue from the glass surface

Prepare the surface: Clean the surface with a clean napkin or if the surface is greasy, then clean it with Pulitore 10.

Apply CR 1 Remover: apply a small amount of CR 1 Remover directly to the area where the cyanoacrylate glue is located. Use a cotton swab or a small brush to evenly apply the remover to the affected area.

Give time for exposure: Let CR 1 Remover stand on the cyanoacrylate glue for a few minutes. The time it takes for the remover to act may vary depending on the thickness of the glue and other factors. Removing cyanoacrylate glue can take from several minutes to several hours.

Wipe the glue gently: after the remover has had time to soften the cyanoacrylate glue, wipe the glue off the surface of the glass. Be careful not to scratch the glass when doing this.

If you find that you have not managed to remove all the necessary glue with the first time, then repeat this process with CR 1 Remover.

Clean the glass: When all the glue is removed, clean the glass surface with Window Spirit.